ION iDM02 Manual page 33

24-bit stereo drum machine with trigger inputs
Table of Contents

Advertisement

UNDERSTANDING RHYTHMIC NOTATION
Measures A piece of music is divided into smaller units called measures (also
called bars), and each measure is divided into beats. In the SR-18, each beat is
further sub-divided into 96 sub-beats.
Rhythmic Values for Notes With a measure written in a 4/4 time signature,
there are 4 beats per measure, and each beat represents a quarter (1/4) note.
Thus, there are 4 quarter notes per measure of 4/4 music. With a 3/4 time
signature the "numerator" indicates that there are 3 beats per measure, while
the "denominator" indicates that each of these beats is a quarter note (1/4).
There are two eighth notes per quarter note. Thus, there are eight eighth notes
per measure of 4/4 music.
There are four16th notes per quarter note. Thus, there are sixteen 16th notes
per measure of 4/4 music.
There are eight 32nd notes per quarter note. Thus, there are thirty-two 32nd
notes per measure of 4/4 music.
There are also notes that span a greater number of beats than quarter notes. A
half note equals two quarter notes. Therefore, there are two half notes per
measure of 4/4 music. A whole note equals four quarter notes, so there is one
whole note per measure of 4/4 music. (We keep referring these notes to 4/4
music because that is the most commonly used time signature in contemporary
Western music.)
Triplets The above notes divide measures by factors of two. However, there
are some cases where you want to divide a beat into thirds, giving three notes
per beat. Dividing a quarter note by three results in eighth-note triplets. The
reason why we use the term eighth-note triplets is because the eighth note is
closest to the actual rhythmic value. Dividing an eighth note by three results in
16th-note triplets. Dividing a 16th note by three results in 32nd note triplets.
Rests You can also specify where notes should not be played; this is indicated
by a rest, which can be the same length as any of the rhythmic values used for
notes.
Dotted Notes and Rests Adding a dot next to a note or rest means that it
should play one-and-one-half times as long as the indicated value. This of
course does not apply to percussion parts. Example: A dotted eighth note would
last as long as three 16th notes (since an eighth note is the same as two 16th
notes).
Uncommon Time Signatures 4/4 (and to a lesser extent 3/4) are the most
common time signatures in our culture, but they are by no means the only ones.
In jazz, both 5/4 (where each measure consists of five quarter notes) and 7/4
(where each measure consists of seven quarter notes) are often used. In
practice, complex time signatures are played like a combination of simpler time
signatures; for example, some 7/4 compositions would have you count each
measure not as 1, 2, 3, 4, 5, 6, 7 but as 1, 2, 3, 4, 1, 2, 3. It's often easier to
think of 7/4 as one bar of 4/4 followed by one bar of 3/4 (or the other way
around, depending on the phrasing), since, as we mentioned, 4/4 and 3/4 are
extremely common time signatures.
31

Advertisement

Table of Contents
loading

Table of Contents