Rear Connections; Connecting To An Additional Appliance With - Philips WACS5 User Manual

Wireless music center + station
Hide thumbs Also See for WACS5:
Table of Contents

Advertisement

If there is interference from neighborhood,
such as the pause during playback, the sets'
slow response to your operation
– Use the WEP* key when connecting your Center
and Station to an existing wireless PC network. See
the manual Connect to your PC.
– Change the operating channel of your Center
and Station when connecting them to an existing
wireless PC network. To learn about how to change
channels, see the manual Connect to your PC.
– If possible, change the operating channels of the
other Wi-Fi devices at your home.
– Turn the above devices in different directions to
minimize interference.
* stands for Wired Equivalent Privacy. It is a
security protocol for wireless local area
network

Rear connections

Warning:
Never make or change connections with
the mains supply switched on.
A
Connecting to an additional appliance
with powerful speakers
IMPORTANT!
CS5
WA
need to work with both external
amplifier and external speakers.
With this compact wireless music system, you
can fully utilize the sophisticated sound input and
speakers in your existing HiFi audio system.
Using audio cables, connect one (one set) of
CS
WA
5's sound output terminals: LINE OUT,
DIGITAL OUT or OPTICAL OUT to the
corresponding input terminals in the connected
device. For better sound output, use DIGITAL
OUT or OPTICAL OUT if it is available on
the connected device.
Helpful hints:
– DIGITAL OUT and OPTICAL OUT are
available on
C5 only.
WA
WACS5_Eng/37
LINE OUT:
On Center:
1
Insert the red plug of the red/white audio cables
(supplied) to the red socket LINE OUT R and
the white plug to the white socket LINE OUT
L.
2
Connect the other end of the audio cables to
the AUX IN (or AUDIO IN)terminals of the
additional appliance, red plug to the red socket
AUX IN R and white plug to the white socket
AUX IN L.
OPTICAL OUT
DIGITAL OUT
On Station:
3
Insert the one-plug end of the audio cable
(supplied) to LINE OUT.
4
Connect the two-plug end of the audio cables to
the AUX IN (or AUDIO IN) terminals of the
additional appliance, red plug to the to the red
socket AUX IN R and white plug to the white
socket AUX IN L.
21
LINE OUT
DC
8/3/2005, 15:12

Advertisement

Table of Contents
loading

Table of Contents