Operating Instructions
(continued)
8. To shut the unit down, press the ON/OFF button.
Note: After a power outage, the unit will memorize the last setting and return the unit to the same setting once power is restored.
Fault Codes
1. If the display reads "AS" or "ES" , a sensor has failed. Contact your Authorized Frigidaire Service Center.
2.If the display reads "EC" , check the following operating conditions. Outlet voltage should be 115V±10% and the
surrounding temperature should be with in the range of 41 °F to 89 °F. Unplug the unit and plug it in again under
normal operating conditions. If the "EC" code persists, contact your Authorized Frigidaire Service Center.
3.If the display reads "E4", the communication between display PCB and main control PCB is faulty. Contact your Authorized
Electrolux Service Center.
2019 Electrolux Home Products, Inc.
Operating Instructions
All rights reserved.
7