Operating Instructions - Frigidaire FFAP5033W1 Use & Care Manual

Operating Instructions

(continued)
2. To turn the unit on, press the ON/OFF button. The unit will run in the factory setting of CONTINUOUS and high fan
speed. In the CONTINUOUS mode, the unit will only display CO and not the room humidity. It is recommended you
leave the unit running in the CONTINUOUS setting for the first three or four days until the sweating and dampness
odors have stopped.
3. After a few days when the Relative Humidity has declined, press the HUMIDITY
between 35% to 85%, so the room is kept at a comfortable humidity. Pressing the
humidity selection in 5% increments. 5 seconds after you have set the desired humidity, the readout will display the
actual room humidity. If at any time you want to return to the CONTINUOUS Mode, pressing the HUMIDITY
will lower the Relative Humidity through 5% decrements until the display reads CO.
4. You can also use the FAN SPEED button to change the fan speed to Hi, Med or Lo. The indicator light will show the
setting you have selected. A higher fan speed will result in quicker moisture removal.
2019 Electrolux Home Products, Inc.
Operating Instructions
or buttons to choose a value
or buttons will change the
All rights reserved.
button
5