TRENDnet User's Guide
11. The Live View page will show up and begin streaming video.
Note: If you were not go through the basic setup, the camera plug‐and‐play process
will begin after you setup the password. Wait a few minutes and press F5 to refresh
the browser for the live video.
© Copyright 2018 TRENDnet. All Rights Reserved.
Logging‐in to the NVR for the First Time (OS X)
1. Open Safari on your computer. In the address bar, enter the IP address of the
NVR 192.168.10.60. (If you have a DHCP server on your network, the IP address
will be assigned dynamically. For example, if you have a home gateway on your
network and you plug‐in the NVR on the same network, then you can find the
NVR IP address on your home gateway), and then press Enter.
2. Enter the user name, admin, and the default password, admin, and then click
OK.
TV‐NVR408
73