TRENDnet User's Guide
2. To erase a key point, click
point, just erase the key point and then add a new one.
3. Click
or
to move the order of the patrol key points.
4. Click
to clean up all key points.
Start or stop a patrol:
Click
to start patrol.
Click
to stop patrol.
Motion Detection
Set up how the motion detection event will be triggered and what actions will be
triggered.
Note: Please reference compatible camera list for more details.
© Copyright 2018 TRENDnet. All Rights Reserved.
on the key point. If you want to edit a key
Camera:
Click to choose the camera you want to change the settings.
Enable
Motion
Check this box to enable motion detection. Click Apply to
Detection:
apply the choice.
Settings:
Setup the motion detection detail.
Sensitivity:
Move the slider to adjust detection sensitivity. Sliding to the
right means the motion event is easier to be triggered.
Draw Area:
Click and drag on the area you want to set up the motion
detection or click Full Screen for the whole image area. The
red grids represent the motion detection area.
Click Clear to clear the motion detection areas.
Motion detection settings
Click Settings to bring out the detailed set up menu.
TV‐NVR408
29