Table of Contents
Advertisement
TRENDnet User's Guide
Playback modes
The video playback not only can playback the video recorded on the hard drive
indexed by the time. You can also search the video with motion detection event,
tag, or playback the video stored on the USB external hard drive.
Event
To search video with motion detection event, click and select the Event playback
mode.
Select the channel you want to search the motion detection. Enter the start and
stop time. And, then click on Search.
The motion recording events are showed on the list. Click
© Copyright 2018 TRENDnet. All Rights Reserved.
to view the video.
Use the scroll bar to browse the recordings and adjust the pre‐play and post‐play
between 5 seconds and the maximum amount of a single section of recording to
decide the length of playback before and after the motion event.
Tag
If you set up the tags and want to search video with the tags, click and select the
Tag playback mode.
Select the channel you want to search the tags. Enter the start and stop time. If you
want to search for specific tag name, enter the tag name or leave it blank for all
tags. And, then click on Search.
TV‐NVR408
68
Advertisement
Table of Contents
