Table of Contents
Advertisement
Phone settings
Music on hold
You can choose whether an external caller hears music on hold during an
internal consultation or when a call is being forwarded.
¤
flashes: 0 = disabled; 1 = enabled
System
Changing the system PIN
¤
Settings
Enter the current 4-digit system PIN (default: 0000)
new 4-digit system PIN
Resetting the system PIN
Resetting the base to the original PIN code 0000:
¤
Unplug the network cable from the base
Registration / paging key on the base
network cable to the base
. . . the base is reset and the system PIN is set to 0000
All handsets are de-registered and must be re-registered. All settings
are reset to the defaults.
Resetting the handset
You can reset individual settings. Entries in the directory and call list, and the
handset's registration to the base, are maintained.
¤
Settings
. . . Perform factory reset?
52
OK
Base
OK
press and hold the key for at least 5 seconds
OK
Handset
OK
. . . The digit for the current setting
enter required digit
OK
System PIN
press and hold the
at the same time reconnect the
OK
Reset Handset
OK
OK
OK
Enter the
OK
Advertisement
Table of Contents
