LENCO CRW-110WH User Manual page 20

Noted:
1) To get a good radio signal, fully unwind antenna and move it around until you get good reception.
2) When the preset stations are full, the display will shows "FUL"
3) When you want remove all presets and restart an auto scan, Long press
CHARGING A MOBILE PHONE
Connect your phones usb charging cable to the USB port on the backside of the clock.
Troubleshooting
WARNING: Never open the unit to keep the warranty valid and never try to repair the product yourself.
Before requesting any service, please check these possible resolutions.
Problem
The unit is not turning on
The buttons are not
responsive
The unit did not save the
original time during a
power failure
Less radio stations found
Technical Specifications
Input adaptor
Speaker output
Batteries in unit
Power consumption
Power consumption (standby)
Operating Temperature
Operating position
Dim. unit
Weight
Power supply adaptor: (For EU only)
Manufacturer:
Model Number:
Use only original AC adaptor
Information
Manufacturers name or trade mark, commercial
registration and address
Model Identifier
Input voltage
Input AC frequency
Possible solution
Ensure the USB cable and adaptor are connected correctly.
Disconnect the power adaptor to restart the unit.
Change the back-up battery (CR-2032)
Fully unwind antenna and move it around until you get good reception.
100-240VAC 50/60Hz
3W±10%*1
CR2032*1
10W(Max.)
1.2W±10%
0°C-35°C
Horizontal
170*110*180 mm(main device)
173*110*205 mm (Gift box)
0.43KG (main device)
DONG GUAN HP-POWER TECHNOLOGY., LIMITED
HP12U-0502000-CEU
Value and and precision
DONG GUAN HP-POWER TECHNOLOGY., LIMITED
NO. 8, Shui Lin Road, TangXia Town, DongGuan City,
Guang Dong Province, China
HP12U-0502000-CEU
100-240V
50/60Hz
20
for 3 seconds.