LENCO CRW-110WH User Manual page 16

1. Press to activate or deactivate the alarm. The alarm icon
and the alarm time will be displayed shortly.
2. Press and hold
3. When the hours flash, press
4. When the minutes flash, press
Alarm mode
5. Press or
F3=Sound only)
6. Press to confirm and continue.
Alarm sound
7. Use or
8. Press to confirm and continue.
Alarm Volume
9. Use or
10. Press to confirm and continue.
Sunrise light brightness
11. Use or
12. Press to confirm and finish alarm setting.
Please following the above steps to set
Note: if there is no operation for 10 seconds in alarm setting mode, it will exit automatically without saving
Voice recorder
1. Press and hold
2. Keep pressing
3. Release
4. Press to listen to the recording. Press
to set the alarm time.
or
or
to select the alarm mode F1, F2 or F3. (F1=Sunrise Light + Sound; F2=Sunrise Light only;
to set a alarm sound (1-8 = preset sound, 9 = recording voice, 10 = FM radio)
to set the volume level between 01 to 15 (Default is level 05).
to set the brightness of sunrise light between 01 to 30 (Default is level 10).
until
and start your voice recording.
to finish the recording and your voice is stored as the 9th alarm sound after you hear 2 beeps
to set the hours. Press
to set the minutes. Press
.
is displayed and you hear a beep sound.
to quit. (It will exit automatically after 30 seconds.)
16
will be displayed when alarm is activated,
to confirm and continue.
to confirm and continue.