Tcp Client Mode Example - Wiznet W5500S2E-Z1 Manual

6.5.2 TCP client mode example

AT/n/r
OK/n/r
AT+ECHO=1/n/r
[ECHO] Value is: 1/n/r
AT+C1_OP=1 /n/r
[C1_OP] Value is: 1/n/r
OK/n/r
AT+IP_MODE=1/n/r
[IP_MODE] Value is: 1/n/r
OK/n/r
AT+C1_PORT=5000/n/r
[C1_PORT] Value is: 5000/n/r
OK/n/r
AT+C1_CLI_IP1=192.168.1.99/n/r
[C1_CLI_IP1] Value is: 192.168.1.99/n/r
OK/n/r
AT+C1_CLI_PP1=5000/n/r
[C1_CLI_PP1] Value is: 5000/n/r
OK/n/r
AT+EXIT/n/r
W5500S2E-Z1 user manual
W5500S2E-Z1 serial to Ethernet module
//Operating mode in TCP Client mode
//Save the settings and switch to data mode
//Terminal check
//ECHO "ON"
//Set into DHCP mode
//Set the local port number
//Set the remote host IP address
//Set the remote host port number