Table of Contents
Advertisement
Return value
Only available on TCP client mode.
6.4.3.8 Device subnet mask (AT+MARK)
Command format
AT+MARK=<mark>\r\n
AT+MARK?\r\n
Return value
Subnet mask format is separate in 4 sections; each section is a decimal value and using a dot to separate. The value
range for each section is 0-255 therefore the maximum value size for subnet mask is 15 bytes.
6.4.3.9 Device gateway (AT+GATEWAY)
Command format
AT+GATEWAY=<gateway>\r\n
AT+GATEWAY?\r\n
Return value
This subnet mask format is separate in 4 sections; each section is a decimal value and using a dot to separate. The
value range for each section is 0-255 therefore the maximum value size for Gateway address is 15 bytes. This
command could not accept xxx.xxx.xxx.0 or xxx.xxx.xxx.255 value inputs.
6.4.3.10 Operating mode (AT+C1_OP)
Command format
AT+C1_OP=<mode>\r\n
AT+C1_OP?\r\n
Return value
6.4.3.11 Start Mode (AT+START_MODE)
Command format
AT+START_MODE =<mode>\r\n
AT+START_MODE?\r\n
Return value
6.4.3.12 Remote host IP address (AT+C1_CLI_IP1)
Command format
AT+C1_CLI_IP1=<ip>\r\n
AT+C1_CLI_IP1?\r\n
Return value
Remote host IP address command sets the IP address that communicates with WIZS2E module. This command will
only available for TCP client and UDP mode.
W5500S2E-Z1 user manual
W5500S2E-Z1 serial to Ethernet module
[C1_BIND] Value is: <bind>\r\nOK\r\n
Parameters
<mark>
Device subnet mask, default: 255.255.255.0
[MARK] Value is: <mark>\r\nOK\r\n
Parameters
<gateway>
Device gateway, default: 192.168.1.1
[GATEWAY] Value is: <gateway>\r\nOK\r\n
Parameters
<mode>
0: TCP server (default)
1: TCP Client;
2: UDP
[C1_OP] Value is: <mode>\r\nOK\r\n
<mode>
0: AT command mode (default);
1: Data transmission mode
[START_MODE] Value is: <mode>\r\nOK\r\n
Parameters
<ip>
Remote host IP address, default: 192.168.1.99
[C1_CLI_IP1] Value is: <ip>\r\nOK\r\n
Parameters
Function features
Define new value
Query current value
Usage
Define new value
Query current value
Function feature
Define new value
Query current value
Usage
Define new value
Query current value
Usage
Define new value
Query current value
Advertisement
Table of Contents
