Wiznet W5500S2E-Z1 Manual page 31

6.4.3.18 Web port number (AT+WEB_PORT)
Command format
AT+WEB_PORT=<port>\r\n
AT+WEB_PORT?\r\n
Return value
This port number will be used on W5500S2E-Z1's webserver through web browser. The value range is 0 to 65535.
If the port wasn't set to 80, it needs to add the port number at the end of IP address. For example: 192.168.1.88:
8000.
Note: If W5500S2E-Z1 works on TCP server mode, HTTP port should be the difference to the local port.
6.4.3.19 Remote host domain name (AT+DOMAIN)
Command format
AT+DOMAIN=<domain>\r\n
AT+DOMAIN?\r\n
Return value
This command sets the remote domain name, so please do not enter IP address format to this command. This
command requires "AT+DNSEN" command to analysis DNS domain name. This command will only available on
TCP client and UDP modes.
6.4.3.20 DNS enable (AT+DNSEN)
Command format
AT+DNSEN=<dns>\r\n
AT+DNSEN?\r\n
Return value
After enable DNS function, W5500S2E-Z1 can use remote host through domain name. Every time the module has
power up, it activates DNS function. This command will only available on TCP client and UDP modes.
6.4.3.21 Reconnect time (AT+RECONTIME)
Command format
AT+RECONTIME=<time>\r\n
AT+RECONTIME?\r\n
Return value
This command configures to limit the time of the TCP client waiting for reconnection the module has disconnected
from a TCP server. This command will only available on TCP client mode. Default value is 0 for direct reconnection.
Value range is 0 to 60,000. Unit: ms.
W5500S2E-Z1 user manual
W5500S2E-Z1 serial to Ethernet module
Parameters
<port>
Web server port number, default: 80
[WEB_PORT] Value is: <port>\r\nOK\r\n
Parameters
<domain>
Remote host domain name
default: www.iwiznet.cn
[DOMAIN] Value is: <domain>\r\nOK\r\n
Parameters
<dns>
0: Disable DNS function (default)
1: Enable DNS function
[DNSEN] Value is: <dns>\r\nOK\r\n
Parameters
<time>
Reconnect time, default: 0
[RECONTIME] Value is: <time>\r\nOK\r\n
Usage
Define new value
Query current value
Usage
Define new value
Query current value
Usage
Define new value
Query current value
Usage
Define new value
Query current value