Table of Contents
Advertisement
6.4.3.3 Device name (AT+NAME)
Command format
AT+NAME=<name>\r\n
AT+NAME?\r\n
Return value
Device name can be user defined for identification.
Remarks: When using NetBIOS name function, device name should follow the NetBIOS naming
6.4.3.4 Device password (AT+PASS)
Command format
AT+PASS=<pass>\r\n
AT+PASS?\r\n
Return value
6.4.3.5 Device IP address (AT+IP)
Command format
AT+IP=<ip>\r\n
AT+IP?\r\n
Return value
W5500S2E-Z1 support IPv4. IP address format is separate in 4 sections; each section is a decimal value and using a
dot to separate. The value range for each section is 0-255 therefore the maximum value size for IP address is 15
bytes. This command could not accept xxx.xxx.xxx.0 or xxx.xxx.xxx.255 value inputs.
6.4.3.6 Local port number (AT+C1_PORT)
Command format
AT+C1_PORT=<port>\r\n
AT+C1_PORT?\r\n
Return value
This command defines port number of the module. It is required to use under TCP server and UDP modes. The
module will use this port number to communicate with other devices. The value range is 0 to 65535 (Port 80 is
default port for web page configuration. Please avoid using this port number.)
6.4.3.7 Local port binding (AT+C1_BIND)
Command format
AT+C1_BIND=<bind>\r\n
AT+C1_BIND?\r\n
W5500S2E-Z1 user manual
W5500S2E-Z1 serial to Ethernet module
Description
<name>
Device name: it can be any character; the maximum length
is 16 bit
[NAME] Value is: <name>\r\nOK\r\n
Parameters
<pass>
Device Password: It only accepts numbers, alphabets or
the combination of both. It does not accept blank as input.
Maximum input length: 16 bytes, Default: admin
[PASS] Value is: <pass>\r\nOK\r\n
Parameters
<ip>
Device IP address, default: 192.168.1.88
[IP] Value is: <ip>\r\nOK\r\n
Parameters
<port>
Local port number, Default: 5000
[C1_PORT] Value is: <port>\r\nOK\r\n
Parameters
<bind>
0: Disable binding local port number
1: Enable binding local port number
Usage
Define new value
Query current value
rules.
Usage
Define new value
Query current value
Usage
Define new value
Query current value
Usage
Define new value
Query current value
Usage
Define new value
Query current value
Advertisement
Table of Contents
