Access Point Without A Usb Cable (Recommended) - Samsung Xpress M2070FW User Manual

Wireless network setup
9 When the wireless network set up is completed, disconnect the USB
cable between the computer and machine. Click Next.
10 Follow the instructions in the installation window.

Access point without a USB cable (recommended)

Items to prepare
• WiFi-enabled PC running Windows 7 or higher and an access point (router)
• Software CD that was provided with your machine
• A machine installed with a wireless network interface
While setting the wireless network, the machine uses PC's wireless LAN. You
might not be able to connect to the Internet.
Creating the infrastructure network
1 Turn on your computer, access point, and machine.
2 Insert the supplied software CD into your CD-ROM drive.
If the installation window does not appear, click Start > All programs >
Accessories > Run.
X:\Setup.exe replacing "X" with the letter, which represents your CD-
ROM drive and click OK.
3 Review and accept the installation agreements in the installation
window. Then, click Next.
2. Using a Network-Connected Machine
158