Printing A Network Configuration Report; Setting Ip Address; Ipv4 Configuration Using Setip (Windows) - Samsung Xpress M2070FW User Manual

Wired network setup
4

Printing a network configuration report

You can print Network Configuration Report from the machine's control panel
that will show the current machine's network settings. This will help you to set
up a network.
• The machine has the display screen: Press the
control panel and select Network > Network Conf. (Network
Configuration).
• The machine has the touch screen: Press Setup from the Main screen >
Network > Next > Network Configuration.
• The machine does not have the display screen: Press the
Stop/Clear) button for more than 4~5 seconds on the control panel.
Using this Network Configuration Report, you can find your machine's MAC
address and IP address.
For example:
• MAC Address: 00:15:99:41:A2:78
• IP Address: 169.254.192.192
5

Setting IP address

(Menu) button on the
First, you have to set up an IP address for network printing and managements.
In most cases a new IP address will be automatically assigned by a DHCP
(Dynamic Host Configuration Protocol) server located on the network.
(Cancel or

IPv4 configuration using SetIP (Windows)

Before using the SetIP program, disable the computer firewall from Control
Panel > Security Center > Windows Firewall.
1
2
3
• The machine that does not support the network interface, it will not be
able to use this feature (see "Rear view" on page 22).
• TCP/IPv6 is not supported by this program.
The following instructions may differ for your model.
Download the software from the Samsung website then unpack and
install it: (http://www.samsung.com > find your product > Support or
Downloads).
Follow the instructions in the installation window.
Connect your machine to the network with a network cable.
2. Using a Network-Connected Machine
137