Hitachi MC-WU5506M User Manual page 9

WARNING
Use only the appropriate accessories. Otherwise it could
cause a re or damage the projector and devices.
• Use only the accessories speci ed or recommended by the projector's
manufacturer. It may be regulated under some standard.
• Neither disassemble nor modify the projector and the accessories.
• Do not use the damaged accessory. e careful not to damage the
accessories. Route a cable so that it is neither stepped on nor pinched out.
Heat may build up in the wireless adapter, to avoid possible burns
disconnect the projector power cord for 10 minutes before touching the adapter.
CAUTION
the core to the projector. That may be required by EMI regulations.
efore connecting the projector to a network system be sure to obtain the
consent of the administrator of the network.
Do not connect the LAN port to any network that might have the excessive
voltage.
The designated wireless adapter that is sold as an option is required to use the
wireless network function of this projector. efore connecting the wireless adapter,
turn off the power of the projector and disconnect the power cord.
NOTE • Do not turn on or off the projector while connected to a device in
operation, unless that is directed in the manual of the device.
• Some input ports are selectable in the use. or details, see User's Manual -
Operating Guide. (
• e careful not to mistakenly connect a connector to a wrong port.
or a cable with a core at only one end, connect the end with
1)
9