Advertisement
Connecting and Operating the 4x1 DVI Switcher
How to Connect the 4x1 DVI Switcher to your devices
1 Connect the supplied DVI cables from the DVI sources into the DVI Switcher Input.
2 Connect the cable from your display (monitor or projector) into the DVI Out of the
4x1 DVI Switcher.
How to Operate the 4x1 DVI Switcher
1 Use the RMT4-IR remote control port to remotely toggle between sources.
2 Alternatively, use the RMT4 wired remote control to toggle between sources.
Operation Notes
The 4x1 DVI Switcher can also be powered from input 1, as long as the device is on and
supplying 5v to the DVI connector.
4
Advertisement
