Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Gefen DVI-441DLS
Summary of Contents for Gefen DVI-441DLS
- Page 1 4x1 DVI DL Switcher with Serial Option U S E R M A N U A L www.gefen.com...
- Page 2 Chatsworth, CA 91311 www.gefen.com support@gefen.com Gefen Inc. reserves the right to make changes in the hard ware, packaging and any accompanying doc u men ta tion without prior written notice. 4x1 DVI DL Switcher is a trademark of Gefen Inc.
-
Page 3: Table Of Contents
Introduction Features Panel Descriptions Connecting and Operating the 4x1 DVI DL Switcher RMT4-IR Installation Dip Switch Guide Operation Notes & Troubleshooting RS-232 Interface Specifi cations Warranty TABLE OF CONTENTS... -
Page 4: Introduction
Our Commitment Gefen will always offer the fi nest quality product at the best possible price. Included in that price is a lifetime of free support from a team of outstanding engineers. Now you can switch easily and reliably between any combination of four dual link DVI &... -
Page 5: Features
FEATURES Features • Switches easily between any four dual link DVI computers with USB 2.0 and audio • Maintains highest 3840 x 2400 resolution dual link video • Saves you money on hardware costs • Use either PC or Mac USB 2.0 keyboard/mouse •... -
Page 6: Panel Descriptions
PANEL DESCRIPTIONS... -
Page 7: Connecting And Operating The 4X1 Dvi Dl Switcher
6- Plug the 5VDC power supply into the 4x1 DVI DL Switcher. How to Operate the 4x1 DVI DL Switcher 1- Use the RMT4-IR remote control port to remotely switch between sources. 2- Use the RS-232 interface with a compliant device to switch between sources. -
Page 8: Rmt4-Ir Installation
RMT4-IR INSTALLATION 1. Remove battery cover from the back of the RMT4-IR remote. 2. Verify that dip switches 1 & 2 are in the down (OFF) position. 3. Insert the battery, hold the battery so that you can see the positive side facing up. The side that is not marked must be facing down. -
Page 9: Dip Switch Guide
The following are the 4 Infrared channels possible for both the RMT4-IR and the 4x1 DVI DL Switcher. The dip switches on both the remote and the switcher itself must match in order to be operational. Channel 0: Channel 2: DIP SWITCH GUIDE Channel 1: Channel 3:... -
Page 10: Operation Notes & Troubleshooting
DVI Switcher and locate the blank sticker. Peel it off to reveal a bank of four dip switch- es. Find the dip switch labeled “4” and fl ip it to the ON position. Now every time you switch the hub will re-initialize itself. -
Page 11: Rs-232 Interface
ASCII RS-232 Settings Bits per second ... 19200 Data bits ... 8 Parity ... None Stop bits ...1 Flow Control ... None RS-232 INTERFACE Binary Table Corresponding Binary RMT4-IR Button 0011 0001 0011 0010 0011 0011 0011 0100... -
Page 12: Specifi Cations
SPECIFICATIONS Video Amplifi er Bandwidth ... 2x 1.65 Gbps Input Video Signals ... 1.2 volts p-p Input DDC Signal ... 5 volts p-p (TTL) Dual Link Range ... 3840 x 2400 DVI Input/Output Connector Type ... DVI-I (only digital signals) USB 2.0 Input Connection ... -
Page 13: Warranty
If equipment fails because of such defects and Gefen Inc. is notifi ed within two (2) year from the date of shipment, Gefen Inc. will, at its option, repair or replace the equipment, provided that the equipment has not been subjected to mechanical, electrical, or other abuse or modifi...
Need help?
Do you have a question about the DVI-441DLS and is the answer not in the manual?
Questions and answers