Adjusting Screen With One-Touch - Hitachi CPX870D User Manual

ADJUSTING SCREEN WITH ONE-TOUCH

FOCUS ZOOM PAGE
DOWN
BLANK LASER
ASPECT
PUSH
ENTER
ESC MENU RESET
POSITION AUTO PinP
MAGNIFY VOLUME
ON
FREEZE MUTE
OFF
WIRELESS KEYSTONE ONE TOUCH
NOTES
• May not function properly with some input signals.
• This function takes about 10 seconds to display an image.
Press the ONE TOUCH button
1
You can activate the following functions just by
pressing the ONE TOUCH button:
(1) Signal search: Cycle through input signals, displaying
the images of retrieved signals. If no signal is found,
returns to the signal that was selected before the search
was begun.
• When BNC (RGB) is selected:
RGB
COMPONENT VIDEO
• When BNC (COMPONENT) is selected:
RGB BNC(COMPONENT)
COMPONENT VIDEO
(2) Automatic adjustment: In RGB mode, automatically
adjust the picture position and size; for VIDEO input,
automatically select the signal mode. (
(3) Automatic keystone distortion correction: This is only
performed if ONE TOUCH of the AUTO menu is set to
TURN ON. When performed, the unit automatically corrects
vertical keystone distortion due to the (forward/backward)
setup angle of the main unit. (Vol.2
BNC(RGB)
S-VIDEO VIDEO
S-VIDEO VIDEO
ONE TOUCH
DVI
DVI
)
20
)
5
23