Removing And Installing A Memory Module; Dimm Population Table - Gigabyte R271-Z31 Service Manual

3-4-2 Removing and Installing a Memory Module

Before installing a memory module, make sure to turn off the computer and unplug the power
cord from the power outlet to prevent damage to the memory module.
Be sure to install DDR4 DIMMs on to this motherboard.
Follow these instructions to install a DIMM module:
1. Insert the DIMM memory module vertically into the DIMM slot and push it down.
2. Close the plastic clip at both edges of the DIMM slots to lock the DIMM module.
3. Reverse the installation steps when you want to remove the DIMM module.
2

3-4-3 DIMM Population Table

RDIMM Maximum Frequency Supported Tablel
Slots
1
2
DIMMs
Populated
1R
1
--
1
--
1
--
1
--
2
1
--
2
--
1
--
1
DIMM
2R
4DR
2DR
--
1
--
1
--
1
--
1
--
1
2
--
2
-- 1
1 1
- 28 -
2
Frequency (MT/s)
1.2V
2667
2667
Not Supported
2667
2400
Not Supported
2133
2133
2133
Not Supported
Not Supported
Not Supported
System Hardware Installation