Personnal Identification Number - Geemarc 250 User Manual

Base Setting

5 - Personnal Identification Number

The base like the handset PIN is pre-set to '1590' ( from factory). This can be
changed - this is recommended for confidentiality.
Use and to select "BS setting" , then press OK
"Base PIN" is displayed
Enter 1590 or your new code if you have changed it , then press OK
Use and to select "Set PIN" , then Press OK
"HS PIN" is displayed
Enter the old code or factory code
Press OK
"New PIN" is dislayed
Enter your new code using the 0 to 9 keys
Press OK to validate
"Retype PIN" is displayed
Enter your new code again
Press OK
Press twice C or once to return to standby mode
24