Adjusting Door Alignment - Westinghouse WSE7000S User Manual

aligned to cupboard –
even gap
4. If the appliance now rocks from one corner to the
opposite rear corner, this means that the floor is uneven;
you will need to put some packing under one of the
rear rollers.
5. You may now need to fine-tune the installation by
adjusting the front rollers once again.

AdjUStiNG dooR ALiGNMENt

Each door is independently adjustable in the vertical
direction by turning the adjustable bolts under the hinges
Top of refrigerator
using the spanner provided.
is level – horizontal
Adjust front rollers for
unevenness of floor. e.g.
adjust this roller down.
Large plastic roller nut
Packing may be required
underneath the rear roller
to ensure stability.
The doors can be adjusted up or down. Depending on the
amount of adjustment required it may be sufficient to adjust
only one door (see diagrams below).
NOTE: When the height of the rollers and adjusting bolts
are correctly adjusted the refrigerator will stand firmly on the
floor and the doors will be in line with one another.
Front roller
Spanner
Adjusting bolt
Spanner
INSTALLATION
7