Performing Daily Maintenance; Starting The Engine - Toro 60213 60216 Operator's Manual

Figure 27
1. Maximum fuel level
4. Install the fuel cap securely
5. Wipe up any spilled fuel.
Performing Daily
Maintenance
Before starting the machine each day, perform the
Each Use/Daily procedures listed in
(page 27).

Starting the Engine

1. Ensure that the clutch lever is in the O
position.
2. Move the fuel valve to the O
way to the right (Figure
g020679
(Figure 26).
Maintenance
FF
position, all the
PEN
28).
1. Choke lever
2. Fuel valve
3. Move the choke lever to the O
28).
Note:
A warm or hot engine may not require
choking.
4. Move the throttle lever 1/3 of the way toward the
M position.
AX
5. Move the engine switch to the O
(Figure 29).
1. Engine switch—O
position
6. Pull the starter handle lightly until you feel
resistance, then pull the handle briskly
30). Return the starter handle gently.
23
Figure 28
3. Throttle lever
position
N
position
N
Figure 29
2. Engine switch—O
FF
position
g019815
(Figure
g021103
N
(Figure