Table of Contents
Advertisement
User's Guide
12. Confirm the message, and then press the
Important:
c
If you continue to use the printer after resetting the ink level without refilling the ink tank to the upper line, printing
may be performed without ink and this may damage the printer. Before you start printing, make sure you visually
check the ink level of the tank.
Related Information
"Ink Bottle Codes" on page 67
&
"Ink Bottle Handling Precautions" on page 67
&
"Ink Spilled" on page 115
&
Maintenance Box Code
The maintenance box can be purchased and replaced by the user.
Epson recommends the use of a genuine Epson maintenance box.
The following is the code for the genuine Epson maintenance box.
T04D1
Important:
c
Once a maintenance box has been installed in a printer it cannot be used with other printers.
Maintenance Box Handling Precautions
Read the following instructions before replacing the maintenance box.
❏ Do not touch the green chip on the side of the maintenance box. Doing so may prevent normal operation and
printing.
❏ Do not drop the maintenance box or subject it to strong shocks.
❏ Do not replace the maintenance box during printing; otherwise, ink may leak.
❏ Do not remove the maintenance box and its cover except when replacing the maintenance box; otherwise ink
may leak.
❏ When the cover cannot be reattached, the maintenance box may not be installed correctly. Remove the
maintenance box, and re-install it.
❏ Do not tilt the used maintenance box until after it is sealed in the plastic bag; otherwise ink may leak.
❏ Do not touch the openings in the maintenance box as you may get smeared with ink.
❏ Do not reuse a maintenance box which has been removed and left detached for a long period. Ink inside the box
will have solidified and no more ink can be absorbed.
❏ Keep the maintenance box out of direct sunlight.
❏ Do not store the maintenance box in high or freezing temperatures.
Refilling Ink and Replacing Maintenance Boxes
x
button.
72
Advertisement
Table of Contents
