Connecting To An Ethernet Network; Broadband Internet Connections - Gateway Solo 9500 User Manual

Connecting to an Ethernet network

If your notebook has a network jack, you can connect it to a 10/100 Ethernet
network.
To connect to a network:
1
Insert one end of the network cable into the network jack
side of the notebook.
2
Insert the other end of the network cable into a network wall jack. Ask
your network administrator to help you select the correct network jack.
Your notebook is now physically connected to the network. Your network
administrator can help you log onto your network.

Broadband Internet connections

You can use your computer's Ethernet jack for more than just networking.
Many broadband Internet connections, such as cable modems and DSL
modems, connect to your computer's Ethernet jack. For more information,
see "Using the Internet" on page 75 and "Networking Your Notebook" on
page 189.
www.gateway.com
Connecting to an Ethernet network
on the
45