Gateway Solo 9500 User Manual page 248

Chapter 17: Restoring Software
15
In the
is the drive letter of your CD/DVD drive), then type the driver location
(directory path) you found using the procedure in "Locating
Windows NT 4.0 drivers" on page 233.
16
Click
17
Reinstall your audio device driver by following the on-screen
instructions.
18
If required, go to "Reinstalling Windows NT 4.0 modem device drivers"
on page 240. Otherwise, go to "Reinstalling the Windows NT 4.0 Service
Pack" on page 244.
Reinstalling Windows NT 4.0 modem device drivers
Use the instructions in this section to reinstall the drivers that support the
modem in your computer.
To reinstall the Windows NT 4.0 modem device driver:
1
Make sure you ran the Windows NT 4.0 Locator utility to find the modem
driver. For more information, see "Locating Windows NT 4.0 drivers" on
page 233.
2
Place Disc 1 of the System Restoration Kit into your CD/DVD drive.
3
If the CD starts automatically, close the CD window.
4
If the driver location information for your modem driver ends with a file
name (for example, setup.exe), go to Step 5.
- OR -
If the driver location information for your modem driver ends with a
backslash (\), go to Step 10.
5
Click
6
In the
drive letter of your CD/DVD drive), then type the driver location
(directory path) you found using the procedure in "Locating
Windows NT 4.0 drivers" on page 233.
240
text box, type the drive letter (usually D:\ where D
Install Driver
.
OK
, then select
Start Run
text box, type the drive letter (usually D:\ where D is the
Open
www.gateway.com
. The Run dialog box opens.