Gateway Solo 9500 User Manual page 242

Chapter 17: Restoring Software
3
Select
Locator utility opens and detects the hardware drivers.
4
When prompted to do so, press any key to continue. The
Windows NT 4.0 Drivers List screen appears. The list shows the devices
in your computer with the names and locations of each driver.
5
If you want to print the
only), press P. Make sure your printer is connected and turned on.
- OR -
If you do not want to print the
the contents of each device's
6
Exit the program by pressing X.
7
Remove Disc 1 of the System Restoration Kit, then restart your computer.
8
Go to the next section for instructions to reinstall the drivers.
234
, then press E
NT 4.0 Driver Locator
Windows NT 4.0 Drivers List
www.gateway.com
. The Windows NT 4.0 Driver
NTER
Windows NT 4.0 Drivers List
and fields.
Name Location
(parallel port printers
, write down