Lcd Panel; Memory; Modem - Gateway Solo 5300 User Manual

Gateway solo 5300: user guide
Hide thumbs Also See for Solo 5300:
Table of Contents

Advertisement

LCD panel

The screen resolution is not correct
Change the screen resolution and color depth from the Display Properties
dialog box. For more information, see "Adjusting the color depth" on
page 128 and "Adjusting the screen resolution" on page 130.
The text on the display is dim or difficult to read
Adjust the brightness controls.
Move the computer away from sources of electrical interference such as
televisions, unshielded speakers, microwaves, fluorescent lights, and
metal beams or shelves.
Change the display settings. For more information, see "Adjusting the
screen and desktop settings" on page 128.

Memory

You receive a "Memory error" message
Make sure the memory modules are inserted correctly in the memory bay
slot. For more information, see "Installing memory" on page 148.
Use diagnostic programs to help determine if a memory module is failing.
For more information, see "Installing memory" on page 148.
You receive a "Not enough memory" error message
Close all programs, then restart the computer.

Modem

Your modem does not dial or does not connect
Make sure your computer is connected to the telephone line and the
telephone line has a dial tone. Use the Setup poster to make sure that
the connections have been made correctly.
Make sure that the modem cable is less than 6 feet (1.8 meters) long.
Remove any line splitters or surge protectors from your telephone line,
then check for a dial tone by plugging a working telephone into the
telephone wall jack.
www.gateway.com
Software support tools
253

Hide quick links:

Advertisement

Table of Contents

Troubleshooting

loading

Table of Contents