Attaching The Stand (C*Fg70* Model Only) - Samsung C27FG73FQU User Manual

Attaching the Stand (C*FG70* model only)

― Before assembling the product, place the product down on a flat and stable surface so that the screen is facing downwards.
: The product is curved. Placing pressure on the product when on a flat surface may damage the product. When the product is on the ground facing up or down, do not put pressure on it.
1
Place the protective Styrofoam (cushion) included
in the package on the floor and place the product
facing down on the Styrofoam, as shown in the
image.
― Make sure to use the styrofoam (cushion) that came
with the monitor.
5
Push the COVER REAR TOP in the direction of the
arrows.
2
Attach the stand to the back of the monitor, in the
direction of the arrow.
6
On the back of the monitor, align and push the
COVER REAR SUB in the groove in the direction of
the arrow.
3
Use the screws on the stand to tightly fasten.
7
After attaching the stand, place the product in an
upright position.
4
On the back of the monitor, align and push the
COVER REAR TOP in the groove in the direction of
the arrow.
Caution
Do not press down on the monitor. There is a risk of
damaging the monitor.
24