― Before assembling the product, place the product down on a flat and stable surface so that the screen is facing downwards.
: The product is curved. Placing pressure on the product when on a flat surface may damage the product. When the product is on the ground facing up or down, do not put pressure on it.
1
Insert the stand neck into the stand base in the
direction shown in the figure.
- Caution
Do not press down on the monitor. There is a risk of
damaging the monitor.
2
Check that the stand neck is firmly connected.
Tightly fasten the connecting screw at the bottom
of the stand base.
3
Place the stand neck of the display on the device as