Fm Operation; Auto Scan; Manual Tune; Scan Setting - Radionette RNSHDIB15E Instruction Manual

FM Operation

Press MODE on the unit or on the remote control repeatedly to select FM radio.

Auto Scan

While listening to an FM station, press SCROLL & SELECT Dial on the unit or press SCAN on
the remote control to perform auto scan. Once a station has been found, the scanning will
stop automatically.

Manual Tune

To tune FM frequency manually, turn SCROLL & SELECT Dial on the unit or press
remote control until your desired frequency is reached.
With FM radio it may be necessary to fine tune each station by turning SCROLL & SELECT
Dial. Each turn will adjust the frequency by 0.05MHz. If reception is still poor, adjust the
position of the aerial or try moving the radio to another location.

Scan Setting

1. In FM mode, press MENU on the unit or the remote control to display the FM menu.
2. Turn SCROLL & SELECT Dial on the unit or press
Scan setting and then press SCROLL & SELECT Dial on the unit or OK on the remote
control to confirm.
3. Turn SCROLL & SELECT Dial on the unit or press
to receive Strong Stations Only or No then press SCROLL & SELECT Dial on the unit or
OK on the remote control to confirm.

Audio Setting

1. In FM mode, press MENU on the unit or the remote control to display the FM menu.
2. Turn SCROLL & SELECT Dial on the unit or press
Audio Setting then press SCROLL & SELECT Dial on the unit or OK on the remote
control to confirm.
3. Turn SCROLL & SELECT Dial on the unit or press
to Listen to Mono only, or NO to let the unit select Stereo or Mono automatically.
4. Press SCROLL & SELECT Dial on the unit or OK on the remote control to confirm.
on the remote control to select
on the remote control to select YES
on the remote control to select
on the remote control to select YES
GB
on the
33