Initial Setup; Turning The Radio On For The First Time - Radionette RNSHDIB15E Instruction Manual

Initial Setup

Turning the Radio On for the First Time

Connecting to the Mains Supply
• Connecting the unit to any other power
source may damage the unit. Unwind
the mains adapter cable to its full length.
Connect the end of the unit and then
connect the mains adapter to the mains
socket. Make sure the mains adapter is firmly
inserted into the mains socket. The unit is
now connected and ready to use.
• To switch the unit off completely, remove
the mains plug from the mains socket.
Ensure all connections are connected before
connecting to the mains power socket.
When your radio is connected to power for the first time,
the unit will display the Setup wizard screen.
Turn SCROLL & SELECT Dial on the unit or press
remote control to select YES to start setup or NO to skip
setup. Press SCROLL & SELECT Dial on the unit or OK on
the remote control to confirm.
• If you select NO or skip all or part of the Setup wizard, you will still be able to play DAB
radio, FM radio, Aux in or Bluetooth source, but you will not be able to use the Internet
Radio, Spotify Connect or Music Player functions.
• When you skip the setup wizard you can select an option to run the Setup wizard next
time you connect power to the radio.
• You can press BACK repeatedly on the unit or MENU on the remote control to exit the
Setup wizard anytime.
• If you skip or exit the Setup wizard, the Main menu will be displayed.
• Always unclip and extend the aerial when listening
to DAB or FM radio. The aerial has a swivel base so
can be set to different angles for best reception.
• Extend the aerial before switching to DAB mode for
the first time. This will ensure that the initial scan
captures all stations in your area.
Setup wizard
Start now?
on the
YES
To the mains
socket
GB
NO
19