Gateway Solo 5100 Important Information Manual page 2

Press the spacebar until the
5.
Press F10, then E
6.
NTER
Right-click the My Computer
7.
System Properties dialog box opens.
8. Click the Device Manager
Click the + next to
9.
Click the second Generic IDE Disk
10.
Properties . The Generic IDE Drive Properties dialog box
opens.
11. Click the Settings tab.
12. In the Options area, click to remove the check mark from the
13 unit check box.
If this option is unavailable, check the
assignment: text box and make sure that
C: does appear, click
Disk option in the list and repeat this Steps 11 and 12.
Click OK , then click
13.
2 Update
Type: option is set to
. The system restarts.
icon, then select
tab.
Disk drives . Three drives are listed.
in the list, then click
Current drive letter
C:
Cancel and select the other Generic IDE
OK again.
[NONE] .
Properties . The
Int
does not appear. If