[Screen Adjustment] (For Pt-Vz575N) - Panasonic PT-VW535N Operating Instructions Manual

Hide thumbs Also See for PT-VW535N:
Table of Contents

Advertisement

Adjusting [KEYSTONE]
1)
Press asqw to adjust.
For details, please refer to [KEYSTONE] in [SCREEN ADJUSTMENT] menu. (
Adjusting [ARC]
Items
Press the q button.
[H]
Press the w button.
Press the a button.
[V]
Press the s button.
Note
f One of [KEYSTONE], [CORNER CORRECTION] and [CURVED CORRECTION] setting value is valid. When [KEYSTONE],
[CORNER CORRECTION] or [CURVED CORRECTION] adjustment is finished, you adjust the others, the adjusted value
will be reset.
f Press the <SCREEN ADJ> button on the remote control when the [KEYSTONE], [CORNER CORRECTION] or [CURVED
CORRECTION] screen is displaying, it will switch to the next adjustment screen.
f When the [CORNER CORRECTION] individual adjustment screen is displaying, the individual adjustment screen of the next
corner can also be displayed by pressing the <ENTER> button.
f Correcting up to ±35° for the tilt in the vertical direction and ±35° for the tilt in the horizontal are available for adjustments
with [KEYSTONE]. However, the image quality will degrade and it will get harder to focus with more correction. Install the
projector so that the correction will be as small as possible.
f Screen size will also change when [KEYSTONE] is used to perform various adjustments.
f Aspect ratio of the image size may shift depending on the correction.
[SCREEN ADJUSTMENT]
You can correct the trapezoidal distortion and the curved distortion of the projected image.
1)
Press as to select [SCREEN ADJUSTMENT].
2)
Press the <ENTER> button.
f The [SCREEN ADJUSTMENT] screen is displayed.
3)
Press as to select one item to adjust.
[KEYSTONE]
[CORNER CORRECTION] Adjusts when the four corners of the projected image are distorted.
[CURVED CORRECTION] Adjusts when the linearity is not uniform or the projected image is curved distortion.
Setting [KEYSTONE]
1)
Press as to select [SCREEN ADJUSTMENT].
2)
Press the <ENTER> button.
f The [SCREEN ADJUSTMENT] screen is displayed.
3)
Press as to select [KEYSTONE].
4)
Press the <ENTER> button.
f The [KEYSTONE] individual adjustment screen is displayed.
5)
Press as to select one item to adjust.
64 - ENGLISH
Chapter 4 Settings - [POSITION] menu
Operation
The top and bottom of
horizontal line will be bulge.
The top and bottom of
horizontal line will be dent.
The left and right of vertical
line will be dent.
The left and right of vertical
line will be bulge.
(For PT-VZ575N)
Adjusts when the trapezoid of the projected image is distorted.
[VERTICAL ARC]
Æ
page 62)
Adjustment
[HORIZONTAL ARC]
[VERTICAL ARC]
[HORIZONTAL ARC]

Advertisement

Table of Contents
loading

This manual is also suitable for:

Pt-vx605nPt-vz575nuPt-vx605nuPt-vz575nPt-vw535nu

Table of Contents