Panasonic PT-VW535N Operating Instructions Manual page 101

Projector settings
1) Turn on the projector.
2) Press the <MENU> button to display the [NETWORK/USB] menu, and then press <ENTER> button.
3) Press as to select [WIRELESS LAN].
4) Press qw to select [SIMPLE] or [NORMAL].
5) Press the <ENTER> button.
f The [WIRELESS LAN] screen is displayed.
6) According to the network number selected in step 4), set the [WIRELESS DETAILED SETUP].
f For details, see "WIRELESS DETAILED SETUP". (
Note
f Wireless LAN and wired LAN cannot be used in the same segment.
f When multiple devices are connected, a unique IP ADDRESS must be allocated to each device.
f SSID has to be entered in alphanumeric letters.
f You cannot set "any" or "ANY" for SSID.
f The projector settings are not required when Miracast is connected. For details about Miracast, please refer to
page 125.
f The following settings are set before the projector leaves the factory.
[DEFAULT GATEWAY]
Computer settings
1) Turn on the computer.
2) Make the network setting according to your system administrator.
f If you select [M-DIRECT] in [WIRELESS LAN], the IP address will automatically be acquired.
f If you select [USER1] ~ [USER3] in [WIRELESS LAN], then make the network settings for the computer and the
projector according to your system administrator.
3) Connect the computer to the network that has been set for the projectors.
f If you use a Windows computer, click
name as the SSID that has been set in the projector when you select [M-DIRECT] in [WIRELESS LAN], or select the
same name as the SSID that is used in current access point when you select [USER1] ~ [USER3] in [WIRELESS LAN].
If you use a Mac computer, click
SSID that has been set in the projector.
f When you select default settings of [M-DIRECT] for [WIRELESS LAN] in the network menu, the SSID is [M-DIRECT +
The last 4 digits of the network ID].
Chapter 4 Settings - [NETWORK/USB] menu
[KEY]
[NORMAL] → [M-DIRECT]
[IP ADDRESS]
[SUBNET MASK]
[SSID]
[CHANNEL]
[KEY]
[NORMAL] → [USER1] ~ [USER3]
[SSID]
[DHCP]
[IP ADDRESS]
[SUBNET MASK]
[AUTHENTICATION]
[ENCRYPTION]
[DNS1] / [DNS2]
on the task tray (bottom right of the Windows screen), then select the same
on the menu bar (top right of the Mac screen), then select the same name as the
Æ
page 91)
[SIMPLE]
proj + The last 4 digits of the network ID
192.168.12.100
255.255.255.0
M-DIRECT + The last 4 digits of the network ID
1
The same string as the SSID
Panasonic Projector
OFF
192.168.11.100
255.255.255.0
192.168.11.1
OPEN
NONE
NONE
ENGLISH - 101