Accessories; Tools For C-4, C-6, C-7, C-8, And C-9; Maintenance Instructions; Lubrication - RIDGID K50-100V Manual

Accessories

WARNING Only the following RIDGID products have
been designed to function with the K-50 Drain Cleaning
Machine. Other accessories suitable for use with other
tools may become hazardous when used on the K-50. To
prevent serious injury, use only the recommended ac-
cessories.

Cables

Catalog Model
No. No.
62225 C-1
56782 C-1IC
89400 C-21
62235 C-2
56787 C-2IC
89405 C-22
62245 C-4
62250 C-5
62260 C-6
96037 C-6IC
62265 C-7
62270 C-8
51317 C-9
Accessories
Catalog Model
No. No.
59235 A-14-6
84325 A-14-10 10' Rear Guide Hose
59270 A-18
59210 A-10
59205 A-1
59295 A-2
59230 A-13
Adapters with Cable
Catalog Model
No. No.
59250 A-17-A
59255 A-17-B
59265 A-17-C
92095 A-17-D
92100 A-17-E
1.800.561.8187 278-104-431.10_REV. C
Description
25' (7.6m) w/Bulb Auger
5 / " x 25' (7.6m) Inner Core
16
w/Bulb Auger
50' (15.2m) w/Bulb Auger
25' (7.6m) w/Drop Head Auger
5 / " x 25' (7.6m) Inner Core
16
w/Drop Head Auger
50' (15.2m) w/Drop Head Auger
25' (7.6m) w/Male Coupling
35' (10.7m) w/Bulb Auger
35' (10.7m) w/Male Coupling
35' (10.7m) w/Male Coupling
7 1 / ' (2.3m) Tight-Wind
2
7 1 / ' (2.3m) All-Purpose Wind
2
10' (3.0m) Heavy-Duty Wind
Description
6' Rear Guide Hose
Front Guide Hose Assembly
Cable Carrier (Holds 90' C-8, C-9)
Left-Hand Mitt
Right-Hand Mitt
Pin Key, 5 / Cable
8
Description
'
Adapter with 25 x 5 / " Cable
16
w/Bulb Auger
'
Adapter with 35 x 3 / " Cable
8
w/Bulb Auger
'
Adapter with 35 x 3 / " Cable
8
w/Male Coupling
'
Adapter with 250 x 5 / " Cable
16
w/Bulb Auger
'
Adapter with 250 x 5 / " Cable
16
w/Drop Head
www.
K-50 Drain Cleaning Machine

Tools for C-4, C-6, C-7, C-8, and C-9

Catalog Model
No. No.
62990 T-201
62995 T-202
63000 T-203
55457 T-225
62067 T-201A Straight Flex Auger
63065 T-217
54837 T-204
63005 T-205
63010 T-206
63015 T-207
63020 T-208
63025 T-209
63030 T-210
63035 T-211
63040 T-212
63045 T-213
63050 T-214
63055 T-215
63060 T-216
63280 T-218
63070 T-219
63080 T-220
63220 T-221
52812 T-230
52817 T-231
52822 T-232
48482 T-250
NOTE! See Ridge Tool Catalog for complete list of tools
and accessories.

Maintenance Instructions

Make sure machine is unplugged from power
source before performing maintenance or mak-
ing any adjustment.

Lubrication

Lubricate machine with grease at grease fitting (located on
jaw housing) once a week if used every day; once a
month if used less. Place a drop of oil on each of the bear-
ing points, thrust bearing, clutch jaws, etc., at least once
a year.
Cables
Cables should be thoroughly flushed with water to prevent
damaging effects of sediment and drain cleaning com-
pounds. Periodically lubricate cables and couplings with
RIDGID Cable Rust Inhibitor.
When not in use, store cables indoors to prevent dete-
rioration by the elements.
information@itm.com
.com
Description
Straight Auger, 5" Long
Bulb Auger, 1 1 / " O.D.
8
Bulb Auger, 7 / ", O.D.
8
Retrieving Auger
Drop Head, 4" Long
"C" Cutter, 1"
"C" Cutter, 1 3 / "
8
Funnel Auger, 3" Long
Spiral Cutter, 1 1 / "
4
Spiral Cutter, 1 1 / "
2
Spiral Cutter, 2"
Grease Cutter, 1"
Grease Cutter, 1 3 / "
8
Grease Cutter, 1 3 / "
4
4-Blade Cutter, 1"
/ "
4-Blade Cutter, 1 3
8
4-Blade Cutter, 1 3 / "
4
Chain Knocker, 2"
Flue Brush, 3"
Flue Brush, 2 1 / "
2
Flue Brush, 2"
Flue Brush, 1 1 / "
2
H-D "C" Cutter, 2"
H-D "C" Cutter, 2 1 / "
2
H-D "C" Cutter, 3"
Tool Set includes:
– T-203 – T-217
– T-205 – A-13
– T-210
WARNING
11