System; Network Setting - Datavideo HS-1600T-2C140TM Instruction Manual

System

The NVS-31 also allows the user to configure the system's network settings, set account login
credentials, update the device firmware, select the time, restore the factory defaults and reboot the
system.

Network Setting

You are allowed to connect the NVS-31 to a network in DHCP or Static IP mode. Disable DHCP server if
you want to connect to the NVS-31 on a fixed IP. An example of Static IP mode configuration is
provided below:
 Static IP: 192.168.1.60
 Subnet Mask: 255.255.255.0
 Default Gateway: 192.168.1.254
 Primary DNS: 192.168.1.1
 Secondary DNS: 8.8.8.8
Note: If you do not remember the IP address assigned
to the device, follow the steps below to reset the
network settings:
 Turn off the machine.
 Press the RECORD and STREAM buttons
simultaneously and switch ON the device.
 Wait for 5 seconds approximately and release the
button push as soon as the two buttons light up.
 The default IP address is 192.168.1.60.
49