Note: Pressing the left or right arrow button on the control panel allows the user to either
decrement or increment Position X by 1. To change the parameter value at an accelerated rate,
simply press and hold the left or right arrow button.
3.1.3 Wipe Effect
On the HS-1600T, there are three wipe effects available for the user to choose. The three wipe effects
are HORIZONTAL, VERTICAL and CENTER. The default is Horizontal.
3.1.4 WIPE Border Size
The WIPE Border Size generally allows the user to select an appropriate border width. Setting the
WIPE Border Size to OFF turns the border off. Setting this parameter to small selects a thin border;
middle will yield a medium size width; large is the maximum wipe border width.
3.1.5 WIPE Border Color
In this option, you will be allowed to select a color for your wipe border. The available colors are listed
as follows:
White
Yellow
Cyan
Green
Magenta
Red
Blue
Black
3.1.6 BKG Color
In this option, you will be allowed to assign a color to the BKG button. The available colors are listed
as follows:
White
Yellow
Cyan
Green
Magenta
Red
Blue
Black
3.2 PIP / Split
Picture-In-Picture (P-In-P) places a sub window on the PGM or Multiview screen. This option
(PIP/Split) allows you to configure various parameters of the PIP window.
Note: When PIP and Lumakey features are enabled at the same time, the lumakey source will be
the upper layer and the PIP source will be the lower layer. The layer order cannot be changed.
Option
Parameters
PIP/Split
PIP Source
Parameter Value or Range
Black
23
Default Value
Input 2