Sony SLV-X821MK2 Instruction & Operation Manual page 9

Step 4
10
-EN
Getting Started
Channel setup map and chart (continued)
Setting the NTSC PB switch to match your TV system
NTSC PB switch
You have to set the NTSC PB switch on the rear of the VCR according to your TV system to
display the on-screen menus when there is no video signal input, and play back a tape
recorded in the NTSC 3.58 system properly.
Set the NTSC PB switch following the table below.
If your TV is compatible with
PAL, SECAM, or MESECAM
NTSC 4.43
NTSC 3.58
Tip
• If you are not sure of your TV's color system, refer to the map and chart on pages 8 and 9.
Notes
• If a video signal is input to the VCR (via the line input, tuner, or playback), the on-screen menus will
appear on your TV regardless of the NTSC PB switch setting.
• If your TV is compatible with the SECAM system, the on-screen menus may be displayed in black and
white.
Set the NTSC PB switch to
ON PAL TV
NTSC 4.43
NTSC 3.58