Sony SLV-X821MK2 Instruction & Operation Manual page 50

Symptom
A TV program does not appear
Recording
on the TV screen.
TV reception is poor.
The tape is ejected when you
press the r REC button.
Nothing happens when you press
the r REC button.
Timer recording
The timer does not operate.
Others
A tape cannot be inserted.
The remote commander does not
function.
The tracking indicator does not
appear on the screen.
The unit is dirty.
Remedy
• If the TV is connected to the VCR using only the aerial cable, make
sure the TV is set to the program position for the VCR.
If you are using a monitor, set it to video input.
• Adjust the TV aerial.
• Make sure the SYSTEM (I, D/K, B/G, or M) option in the TUNER
PRESET menu is set to the system in your area.
• Check that the safety tab has not been removed.
• Make sure the tape is not at its end.
• Select the correct source with the INPUT SELECT button. Select a
program position when recording TV programs; select "L1" or "L2"
when recording from other equipment.
• Check that the clock is set. The clock and timer stop if the VCR is
disconnected from the mains for more than one hour.
• Make sure a tape has been inserted.
• Check that the safety tab has not been removed.
• Make sure the tape is not at its end.
• Make sure a program has been set for timer recording.
• Check that a tape isn't already in the tape compartment.
• Make sure you are pointing the remote commander at the remote
sensor on the VCR.
• Replace all the batteries in the remote commander with new ones if
they are weak.
• The recording condition of the tape is very poor and tracking cannot
be adjusted.
• Clean with a dry soft cloth, or a soft cloth slightly moistened with a
mild detergent solution. Do not use any type of solvent, such as
alcohol or benzine.
If you have any questions or problems concerning your unit, please
consult your nearest Sony service facility.
Additional Information
51
-EN