Sony SLV-X821MK2 Instruction & Operation Manual page 17

Tuning the VCR to TV
channels manually (continued)
18
-EN
Getting Started
5 Press PROG +/– to select the program position.
05
Selected program position
TUNER PRESET PROG 1 4
SYSTEM I D / K B / G M
NORMAL / CATV NORM CATV
CHANNEL SET 2 1
AF T
ON OFF
F I NE TUN I NG
:
SET
6 Press CURSOR / to start tuning.
The VCR starts searching for a channel and displays the first one it
finds on the TV screen. Press CURSOR ?// repeatedly until the
channel you want is displayed.
TUNER PRESET PROG 1 4
SYSTEM I D / K B / G M
NORMAL / CATV NORM CATV
CHANNEL SET 3 5
AF T ON OFF
F I NE TUN I NG
SET :
The channels are scanned in the order shown in the table beginning
on page 20 to 23.
If you know the number of the channel you want, press the program
number buttons. For example, for channel 5, first press "0" and then
press "5."
7 If the TV sound is distorted or noisy, or the color TV program
becomes black and white, etc., press CURSOR >/./?// to
I
move the cursor ( ) to SYSTEM, then highlight I, D/K, B/G, or M
whichever is applicable in your area.
Refer to the "Channel setup map and chart" on pages 8 and 9, and
"Resetting the TV system" on page 19.
TUNER PRESET PROG 1 4
SYSTEM I D / K B / G M
NORMAL / CATV NORM CATV
CHANNEL SET 3 6
AF T ON OFF
F I NE TUN I NG
:
SET
8 To allocate another channel to another program position, repeat
steps 5 and 6.
9 Press EXECUTE to store all the allocated channels.