Table of Contents
Advertisement
Optimizing the image
Selecting a picture mode
The projector is preset with several predefined
picture modes so that you can choose one to
suit your operating environment and input signal
picture type.
To select an operation mode that suits your
need, you can follow one of the following steps.
•
Press MODE/ENTER on the remote
control or projector repeatedly until your
desired mode is selected.
•
Go to the PICTURE > Picture Mode menu and press
mode.
The picture modes are listed below.
1.
Bright mode: Maximizes the brightness of the projected image. This mode is
suitable for environments where extra-high brightness is required, such as using
the projector in well lit rooms.
2.
Presentation mode (Default): Is designed for presentations. The brightness is
emphasized in this mode.
3.
Vivid mode: This is suitable for displaying colorful video and pictures with well-
balanced color saturation and high color brightness
4.
sRGB mode: Maximizes the purity of RGB colors to provide true-to-life images
regardless of brightness setting. It is most suitable for viewing photos taken with
an sRGB compatible and properly calibrated camera, and for viewing PC graphic
and drawing applications such as AutoCAD.
5.
Cinema mode: Is appropriate for playing colorful movies, video clips from digital
cameras or DVs through the PC input for best viewing in a blackened (little light)
environment.
6.
User 1/User 2 mode: Recalls the settings customized based on the current
available picture modes. See
details.
Setting the User 1/User 2 mode
There are two user-definable modes if the current available picture modes are not
suitable for your need. You can use one of the picture modes (except the User 1/User
2) as a starting point and customize the settings.
1.
Press MENU/EXIT to open the On-Screen Display (OSD) menu.
2.
Go to the PICTURE > Picture Mode menu.
3.
Press
4.
Press
This function is only available when User 1 or User 2 mode is selected up in the
Picture Mode sub-menu item.
5.
Press
/
to select User 1 to User 2.
to select Reference Mode.
/
to select a picture mode that is closest to your need.
"Setting the User 1/User 2 mode" on page 33
/
to select a desired
for
Operation
33
Advertisement
Table of Contents
