Optoma X400LVe User Manual page 38

USING THE PROJECTOR
‡ Color Temperature (Data mode): Select a color temperature from Warm, Medium, or Cool.
Color Matching: Select the following options:
‡
± Color: Adjust the red (R), green (G), black (B), cyan (C), yellow (Y), magenta (M), and white (W)
level of the image.
± Hue: Adjust the color balance of red and green.
± Saturation: Adjust a video image from black and white to fully saturated color.
± Gain: Adjust the image brightness.
± Reset: Return the factory default settings for color matching.
± Exit: Exit the "Color Matching" menu.
‡ RGB Gain/Biase: This settings allows to configure the brightness (gain) and contrast (bias) of an
image.
± Reset: Return the factory default settings for RGB gain/bias.
± Exit: Exit the "RGB Gain/Bias" menu.
‡ Color Space (non-HDMI input only): Select an appropriate color matrix type from the following:
AUTO, RGB, or YUV.
Color Space (HDMI input only): select an appropriate color matrix type from the following: Auto,
‡
RGB(0-255), RGB(16-235), and YUV.
‡ White Levele: Allow user to adjust White Level when inputting Video signals.
Notee:
‡ Black Levele: Allow user to adjust Black Level when inputting Video signals.
Notee:
‡ IREe: Allow user to adjust IRE value when inputting Video signals.
Notee:
‡
‡
Signal
Adjust the signal options.
‡ Automatic: Configure automatically the signal (the frequency and phase items are grayed out). If
automatic is disabled, the frequency and phase items will appear for tuning and saving the settings.
‡ Frequency: Change the display data frequency to match the frequency of your computer's graphic
card. Use this function only if the image appears to flicker vertically.
Phase: Synchronize the signal timing of the display with the graphic card. If the image appears to be
‡
unstable or flickers, use this function to correct it.
38 English
Color
R
G
B
Reset
Exit
White level can only be adjusted for Video input source.
Black level can only be adjusted for Video input source.
IRE is only available with NTSC video format.
IRE can only be adjusted for Video input sources.
Color Matching
White