Adjusting The Height And The Viewing Angle : Prolite B2282Hs - Iiyama ProLite E2282HS-GB1 User Manual

ADJUSTING THE HEIGHT AND THE VIEWING ANGLE : ProLite B2282HS

 For optimal viewing it is recommended to
position yourself directly opposite to the full face
of the monitor, then adjust the monitor's height
and angle to your own preference.
 Hold the panel so that the monitor does not topple
when you change the monitor's height or angle.
 You are able to adjust the monitor's height up to
130mm, angle up to 45 degrees right and left, 22
degrees upward and 5 degrees downward.
NOTE  Do not touch the LCD screen when you
change the height or the angle. It
may cause damage or break the LCD
screen.
 Careful attention is required not to pinch
your fingers or hands into the moving
part of the stand when you change the
height or the angle.
 Injury can occur if care is not taken to
avoid fi nger contact with the displays
base when adjusting the height.
14 BEFORE YOU OPERATE THE MONITOR
45°
Monitor
Stand
130mm
45°