Operating The Monitor - Iiyama ProLite E2282HS-GB1 User Manual

OPERATING THE MONITOR

To create the best picture, your iiyama LCD monitor has been preset at the factory with the
COMPLIANT TIMING shown on page 31. You are also able to adjust the picture by following the button
operation shown below. For more detailed adjustments, see page 22 for SCREEN ADJUSTMENTS.
Press the ENTER Button to start the On Screen Display feature. There are additional
Menu items which can be switched by using the
Select the Menu item which contains the adjustment icon relating to the adjustment
you want to make. Press the ENTER Button. Then, use the
highlight the desired adjustment icon.
Press the ENTER Button again. Use the
adjustment or setting.
Press the EXIT Button to leave the menu, and the settings you just made would
be automatically saved.
For example, to correct for vertical position, select Menu item of Geometry and then press the
ENTER Button. Then, select
appears after you press the ENTER Button.
Main Menu
Auto Adjust
Luminance
Geometry
Color
OSD
Then, use the /
overall display should be changing accordingly while you are doing this.
Press the EXIT Button lastly, it ends, all changes are saved in the memory.
NOTE
 When button operations are aborted during adjustment, On-Screen Display disappears when
the time set for the OSD Time has passed. Also, press the EXIT button to quickly turn off the On-
Screen Display.
 Any changes are automatically saved in the memory when the On Screen Display disappears.
Turning off the power should be avoided while using the Menu.
 Adjustments for H. / V. Position, Pixel Clock and Phase are saved for each signal timing. Except for
these adjustments, all other adjustments have only one setting which applies to all signal timings.
Main Menu
Auto Adjust
Luminance
Geometry
Color
OSD
(V.Position) by using the
Language
Recall
Miscellaneous
Input Select
Audio
Buttons to change the vertical position settings. The vertical position of the
Geometr y
V. Position
/ Buttons.
Language
Recall
Miscellaneous
Input Select
Audio
/ Buttons to make the appropriate
/ Buttons. An adjustment page
Geometr y
H. Position
V. Position
Pixel Clock
Phase
50
OPERATING THE MONITOR 15
/ Buttons to
50
50
50
50