Specifications - Furuno Navpilot 500 Operator's Manual

Autopilot
Hide thumbs Also See for Navpilot 500:
Table of Contents

Advertisement

FURUNO
1
CONTROL UNIT
1.1
Display
1.2
Backlight
1.3
Contrast
1.4
Useable Set
2
PROCESSOR UNIT
2.1
Rudder Mode
2.2
Weather Adjustment
2.3
Rudder Angle Ratio
2.4
Rudder Angle Equivalent AUTO/0-9
2.5
Rudder Angle Settings
2.6
Alarm
3
INTERFACE
3.1
Ports
3.2
Input Sentences
Command Bearing
Ship's Location (L/L)
Ship's Location (LOP)
SOG/COG
STW
Heading (HDG)
Destination
Bearing/distance
Time
Arrival Alarm
Cross Track Error
Water Depth
Water Temperature
Wind Speed/Bearing
3.3
Output Sentences
3.4
I/O Control
SPECIFICATIONS OF AUTOPILOT
NAVPILOT-500
Monochrome LCD, 83 (W) x 83 (H) mm, 160x160 dots
Adjustable in 8 steps
16 steps
6 sets
Manual, Auto, Dodge, Remote, Navigation*
AUTO/CALM/MODERATE/ROUGH
AUTO/0-9
45° max.
Bearing deviation, Out of course*, Watch, Ship's speed*,
Water temperature*, Depth*, Log*
*: Navigation data required
Navigation data (NMEA): 1, Output (NMEA): 1
Input (NMEA): 1, I/O for Bearing Sensor (NMEA): 1
IEC 61162-1 ed1/2, IEC 61162-2, NMEA 0183 1.5/2.0/3.0
APA, APB, BOD/XTE, RMB
GGA, RMC, RMA, GLL
GLC, GTD, RMA
VTG, RMC, RMA
VHW
HDT, HDG, HDM
RMB, WPL
RMB, BWC, BWR
RMC, ZDA
AAM, RMB
APB, XTE, RMB
DPT, DBT
MTW
VPW, MWD, MWV
NMEA 0183 1.5/2.0/3.0
GGA, RMA, RMC, GLC, GTD, VTG, VHW, WPL, BWC, BWR, ZDA,
AAM, APB, XTE, DPT, DBT, MTW, VPW, MWD, MWV
RS-232C
SP - 1
NAVPILOT-500
E7250S01A

Advertisement

Table of Contents
loading

This manual is also suitable for:

Navpilot-500

Table of Contents