Table of Contents
Advertisement
Process has been canceled as there is no space on the device. Please free up enough
memory space by reducing usage and try again.
Processing data was cancelled due to memory full.
Reduce the usage on the device to ensure available memory, and then retry.
Process has been canceled by a device error. After maintenance or change of the
device, please try again.
Processing data was cancelled because an error occurred on the device.
Repair or replace the device, and then retry.
Deleting data.
This machine ran out of color toner. Color print data is being deleted.
Wait for a while.
Color toner empty. Job cancelled
The print data was cancelled because color toner is empty. To delete the message, press the
Error PDF
The PDF file is damaged.
Check the file.
Invalid Password
This PDF file is password protected.
Password required to print
This PDF needs authentication. Enter a password to print.
No communication with the SNTP server.
Obtaining current time from the SNTP server failed. Check the server.
Can not read the file
The USB Memory was removed while printing from USB Memory. Do not remove USB Memory while printing is in
progress.
Cannot open the file.
The specified file could not be Opened. Check the file.
Cannot read the file.
Files could not be read. Check the device where the files are stored.
Getting the list ...
Data is being read from USB Memory.
Press the Stop button to cancel reading.
[COLOR] Image Drum Sensor Error
(ONLINE) button.
A sensor error has occurred in the image drum indicated on the screen.
Uninstall the image drum, and then install it again.
If the message persists, uninstall the toner cartridge and install it again.
C: Cyan (blue), M: Magenta (red), Y: Yellow, K: Black
Rear Output Tray Open. Duplex Not Available Error code: 581
2-sided printing failed because the rear output tray is open.
Close the rear output tray and tray again.
Open Output Tray. Rear Output Tray Error. Error code: 409
The rear output tray was moved while duplex printing.
Close the rear output tray and remove the jammed paper remaining inside of the unit.
Wait Timeout in menu is disabled.
Wait Timeout is disabled.
Press [Functions], select [Setting] > [Admin Setup] > [Print Setup] > [Print menu] > [Printer Adjust] > [Timeout Injob]
on the operator panel, and then select a longer print timeout value.
- 116 -
6. Troubleshooting
Advertisement
Table of Contents
