Quick Start - NEC MultiSync EA244UHD-BK User Manual

Table of Contents

Advertisement

Quick Start

To connect the LCD monitor to your system, follow these instructions:
NOTE:
Make sure to read "Recommended Use" (page 3) before installation.
1. Turn off the power of your computer.
2. For a PC with DisplayPort output: Connect the DisplayPort cable to the connector of the display card in your system
(Figure A.1).
For a PC or MAC with DVI digital output: Connect the DVI cable to the connector of the display card in your system
(Figure A.2). Tighten all screws.
NOTE:
Some Macintosh systems do not require any Macintosh cable adapter.
For a PC with HDMI output: Connect the HDMI cable to the connector of the display card in your system (Figure A.3).
For a smart phone or tablet with MHL output: Connect the HDMI - micro USB cable to the connector of the smart phone
or tablet (Figure A.4).
DisplayPort cable
DVI cable (not included)
Figure A.1
NOTE:
1. Please use a DisplayPort cable with DisplayPort logo.
2. When removing the DisplayPort cable, hold down the top button to release the lock.
3. Place hands on each side of the monitor to tilt the LCD panel 30-degree angle and lift up to the highest position.
4. Connect all cables to the appropriate connectors (Figure C.1). When using the USB cable, connect the B type connector to
the USB upstream port on the left back side of the monitor and the A type connector to the downstream port on the computer
(Figure C.1a). If using the cable from a USB device, plug into one of the downstream ports of the monitor.
NOTE:
Incorrect cable connections may cause abnormal operation, damage display quality/components of LCD module and/
or shorten the module's life.
NOTE:
Use an audio cable without a built-in resistor. Using an audio cable with a built-in resistor turns down the sound.
30° Tilt
USB 3.0 Downstream
USB 3.0 Downstream
USB Upstream
USB Upstream
DVI-D2*
Power cord
Figure C.1
*: See page 29.
1
*
: SingleLink.
Figure A.2
Headphone
USB 3.0 Downstream
Highest
Stand
Position
HDMI1/MHL
HDMI1/MHL
DisplayPort2
DisplayPort2
ControlSync IN/OUT*
ControlSync IN/OUT*
1
1
DVI-D1*
HDMI2
HDMI2
DisplayPort1
DisplayPort1
Audio Input
Audio Input
HDMI cable (not included)
Figure A.3
A Type
English-6
HDMI - micro
USB cable
(not included)
Figure A.4
A Type
B Type
B Type
Figure C.1a

Advertisement

Table of Contents
loading

This manual is also suitable for:

Multisync ea244uhdMultisync ea244uhd-wh

Table of Contents