Fujitsu ARXG22KMLB Design & Technical Manual page 277

1) Remote controller address setting (for Wall-mounted type only)
NOTES:
• Because this setting is normally done automatically when 2-wire-type wired remote controller is
installed, setting is unnecessary.
• This setting is configurable only by wireless remote controller, but not configurable by Polar 3-
wired remote controller.
Multiple indoor units can be operated by using one wired remote controller.
Set the unit number of each indoor unit.
Function number
00
NOTES:
• When connecting Polar 3-wired remote controller, set the remote controller address in the order
of 0, 1, 2, ....., and 15.
• When different type of indoor units (such as wall mounted type and cassette type, cassette type
and duct type, or other combinations) are connected using group control system, some func-
tions may no longer be available.
2) Filter sign
Select appropriate intervals for displaying the filter sign on the indoor unit according to the estimated
amount of dust in the air of the room.
If the indication is not required, select "No indication" (03).
Function number
11
Setting
description
Standard
Long interval
Short interval
14-5. Function details
Setting value
00
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
Setting value
00
01
02
03
Compact
Mini duct
cassette
2,500 hours
4,400 hours
1,250 hours
Setting description
Unit no. 0
Unit no. 1
Unit no. 2
Unit no. 3
Unit no. 4
Unit no. 5
Unit no. 6
Unit no. 7
Unit no. 8
Unit no. 9
Unit no. 10
Unit no. 11
Unit no. 12
Unit no. 13
Unit no. 14
Unit no. 15
Setting description
Standard
Long interval
Short interval
No indication
Slim duct
400 hours
1,000 hours
200 hours
- 269 -
Factory setting
♦
Factory setting
♦
Medium static
Wall mounted
pressure duct
2,500 hours 400 hours
4,400 hours 1,000 hours
1,250 hours 200 hours
14. Function settings